V-Bar Overview:

Get rid of the flybar and all its associated mechanical parts in the rotor head of your helicopter - now this entire system can be replaced by an electronic set-up, the Virtual Flybar System (“V-Bar”). By clicking very few parameters in a software module, pilots can control the flight properties of their model in a very simple and effective manner. In 3D flying, the use of the V-Bar system expands the flight envelope: Compared to conventional, mechanical, rotor heads, the V-Bar system reacts much quicker and with much more agility. It is less susceptible to unwanted effects from gusts of wind. Moreover, the undesired internal effects of a mechanical system are completely eliminated: The helicopter will respond to the input in the most exact way possible. (Note: V-Bar is not an autopilot!)

Features:
• Auto-Learn Function
• Preset parameters for many common helicopters
• Programming via PC, control panel (item MIK4152), blue-tooth (item MIK4256) or mobile phone

Digital operation means maximal control and ultimate precision! This is also true for scale models with multi-blade rotor heads. A scale pilot can set the parameters so that the heli performs very stable reacts more sluggishly. This is advantage for inexperienced novices. You can reach a new dimension of performance even in fast forward or backward flight.

A further highlight of the VBar is its integrated Heading Hold tail rotor gyro. It has excellent stopping behavior and very constant cyclic and tail rate in any wind condition.

Highlights:
• Digital flight performance - like a simulator
• Very resistant to wind
• Continuously adjustable head set-up, from mild to wild
• Weight-reduced, no-play rotor head with less parts
• Straightforward set-up, easily reproduced
• Reduced air drag, releasing more power and giving longer flight times (e-powered helis!)

Contents:
• Full Size V-Bar
• Version 5.0 Express PC Software
• USB cable
• Patch Cables: 3.1" For use with a primary receiver (if you opt NOT to use Satellites)
• 2-Sided Gyro Tape

Important Information:
• Support site: http://www.vstabi.info/en
• The full size V-Bar will include Version 5.0 Express software.
• The full size V-Bar does have provisions for a Nitro governor feature, however, the governor can ONLY be used with the Pro version software. It will not work with Express software.
• Software to run the governor will be available for download shortly after release and will be included in a free update patch for the Pro software.
• Version 5.0 Pro software is available for purchase and download here: http://www.mikado-heli.com.hk/