e-Station PB6 Li-Po Balancer

Product Information

- Perfect balancing the Lithium battery(Li-Po, Li-Io, Li-Fe) with maximum accuracy

It monitors the voltages of each cell during the charge process to equalize the peak voltage.

We guarantee the final voltages are nomalized with an accuracy less than 0.01V.

PB-6 can be used with any brands of charger but you had better use it being linked with e-STATION chargers.

- High circuit power that enables fast-balancing

PB-6 adopts bigger capacity of circuit to perform balancing rapidly. It can drain the current from each cell up to 500mA at a time. It is very essential for balancing the larger capacity of batteries.

That high performance causes the internal heat. So PB-6 has an outer case of aluminum that is easy to emit the internal heat

- Capable of self-balancing without a charger

PB-6 can be self-operative without linking to charger. When you connect the battery pack to the individual port of PB-6 the balancing job will be started instantly. In this case the individual cell voltages will be equalized to the least cell voltage of the battery pack.


Related items (sold separately)

individual cell connector for Align/Dualsky/KongPower ( EAC124)

PB-6 dual link cable

PB5/PB6 link cable to charger

Individual cell connector accept Align/Dualsky/Kongpower ( EAC144)

Individual cell connector accept PolyQuest ( EAC143 )

Individual cell connector accept Kokam/Graupner ( EAC148 )

Be the first to review this product!

• Ask a question about this product
• Tell a Friend
• Write review / comment